Toll Free

(844) 533-7767

Have Any Question

(661) 645-1071

Class 1 Division 1 LED Lighting (C1, D1) is used in hazardous location areas to prevent high voltage, high amperage equipment from producing a source of ignition. A heavy-duty luminaire surrounds the spark-producing components so that if vapors or gas leak in, and are ignited, the explosion is contained. For use in general industrial and general marine applications where vapor proof or waterproof fixtures are mandated. 

Class 1 Div 1 LED Lighting

HA03
Brand: AGC
Mounting Options; Ceiling mount,
25° Stanchion mount, Wall bracket,
Pendant mount,Trunnion mount;
Wet and Marine Locations;
30/40/50/60/70W;
up to 9,800 lumens;
Prices start at $300.

Class 1 Division 1 LED Lighting

UFO C Series
Brand: Venas
Up to 42,000 lumens @ 300W;
Surface mounting and pendant installations;
ETL: UL1598 / UL1598A / UL844 /
CSA C22.2 No.137 / No. 250.0;
Class 1, Divi 1, Groups C,D;
Class 1, Division 2 Groups A,B,C,D;
60/80/100/120/150/180/200/240/300W;
Prices start at $400.

Class 1 Division 1 LED Lighting

D Series
Brand: Venas
Up to 29,700 lumens @ 220W;
ETL: UL1598 / UL1598A / UL844 /
CSA C22.2 No.137 / No. 250.0;
Class 1 Div. 1 Groups C,D;
Class 1 Div 2 Groups A,B,C,D;
20/40/60/80/100/120/150/200W/220W;
Prices start at $400.

Class 1 Division 1 LED Lighting

KLE1017
Brand: Cary
Flood light
Up to 22,000 lumens @ 200W;
ETL: Mounts; Ceiling, Floor, Pole, Wall;
85/100/120/150/185/200W;
Prices start at $200.

Class 1 Div 1 LED Lighting

G Series
Brand: Venas
Wall Mount, Low Bay;
Spherical Glass Diffuser with Wire Guard,
Up to 5400 lumens @ 40W;
ETL: UL1598 / UL1598A / UL844 /
CSA C22.2 No.137 / No. 250.0;
10W/20W/30W40W;
Prices start at $300

Hazardous Location Linear Lighting

I Series
Brand: Venas
Paint spray booth, Low Bay;
2ft, 4ft Linear fixtures;
UL: UL1598 / UL1598A / UL844 /
CSA C22.2 No.137 / No. 250.0;
Class 1 Division 1 Groups C,D;
Class 1 Division 2, Groups A,B,C,D;
up to 12,660 lumens @ 100W;
30W/40W/50W/60W/100/120W;
Prices start at $500.

Class 1 Div 1

IR4
Brand: IRL
Paint spray booth approved;
LED linear – 2ft, 4ft models;
Corrosion resistant, marine grade, copper-free aluminum,
 17/ 35/40/54/60W; Made in USA
Prices start at $650.

Explosion Proof Exit Sign

J Series
Brand: Venas
Explosion Proof emergency exit sign with battery back-up;
ETL: UL1598 / UL1598A / UL844 /
CSA C22.2 No.137 / No. 250.0;
Class 1 Division 1 Groups C,D;
Class 1 Division 2 Groups A,B,C,D;
3W/7W/11W;
Prices start at $1100.

Portable Explosion Proof Lighting

L Series
Brand: Venas
Drop Light
 
Class 1 Division 1,
Swivel hook for hanging
and hands-free operation;
Battery backup for emergencies;
available in 5/7/9/10/15/20/30W;
Prices start at $400.

Explosion proof LED lighting for hazardous areas is a must-have for industries that operate in hazardous locations that deal with flammable gases and ignitable concentrations of gases or vapors. Class 1 Division 1 lighting requirements need to be carefully observed to ensure safety in these hazardous areas.

Hazardous locations are areas where the presence of flammable gases, vapors, or dust particles can cause an explosion or fire. Industries such as oil and gas, chemical, pharmaceutical, and mining are among those that operate in hazardous locations. These industries need to comply with strict safety regulations set by the National Electric Code (NEC) to ensure a safe working environment. One such regulation is the use of explosion proof  light fixtures for hazardous areas.

Class 1 Div 1 lighting is designed to prevent the ignition of flammable gases or dust particles in hazardous areas. These lights are built with a rugged construction that can withstand harsh environments and prevent the release of sparks or heat that could ignite flammable substances. LED lights are ideal for hazardous areas because they produce less heat and consume less energy than traditional lighting sources, making them more efficient and cost-effective. read more about Shining a Light on Safety: Your Guide to Explosion Proof Drop Lights here.

 

C1 Div 1 lighting requirements are a set of regulations that specify the design, installation, and use of lighting in hazardous locations. These requirements are set by the NEC and are designed to prevent explosions or fires caused by electrical equipment. Class 1 Div 1 fixtures are required in areas where hazardous substances are present continuously or intermittently. The lighting fixture must be designed to withstand the conditions in the hazardous area and must be installed in a manner that prevents sparks or heat from escaping. read more about Where To Use Explosion Proof Lighting LED  here.

Flammable gases are one of the most common hazards in hazardous locations. These gases can ignite with just a spark or heat source, causing an explosion or fire. LED explosion proof lighting is designed to prevent the release of sparks or heat that could ignite flammable gases. These lights are built with a rugged construction that can withstand harsh environments and prevent the release of sparks or heat that could ignite flammable substances.

Class 1 Division 1 LED Lighting

 

FAQs About Class 1 Division 1 Lighting Fixtures

Class 1 Division 1 lighting fixtures are lighting fixtures used in hazardous work environments where the presence of flammable gases and vapors or combustible dust is possible. These fixtures are certified by the local and national authorities, and they must meet certain standards to be classified as Class 1 Division 1 fixtures.

FAQs About Class 1 Division 1 Lighting Fixtures

Q1: What types of hazardous locations are suitable for Class 1 Division 1 fixtures?
A1: Class 1 Division 1 fixtures are suitable for hazardous locations where the following conditions could potentially occur:

• Combustible dust or fibers that could create a fire or explosion risk;
• Flammable or combustible gases and vapors that are present in the air;
• Ignitable fibers and flyings that could create a fire or explosion risk;
• Liquid-based combustibles, such as fuel, oil, or paint; and
• Combustible fibers and flyings from storage, handling, or processing operations.

Q2: What are the requirements for Class 1 Division 1 lighting fixtures?
A2: Class 1 Division 1 fixtures must meet certain standards to be certified by local and national authorities. These standards include:

• The fixture must be constructed of approved materials that won’t add to the risk of ignition;
• The fixture must be able to withstand a minimum of 20kA (kiloamperes) of short-circuit current;
• The fixture must remain covered and shielded to prevent accidental contact with live parts;
• The fixture must be able to withstand temperatures up to 105°C (221°F);
• The fixture must provide sufficient protection against dust and water intrusion

Q3: What is class 1 division 1 lighting?
A3: A heavy-duty luminaire surrounds the spark-producing components so that if vapors or gas leak in, and are ignited, the explosion is contained

Class 1 – Hazardous locations or areas where flammable gases or vapors are/could become present in concentrations suitable to produce explosive and/or ignitable mixtures. Class 1 locations are further divided into 2 divisions:

Class 1 Div 1: Three different situations could exist to classify an area as a Class 1 Division 1 location.

  1. When the atmosphere of an area or location is expected to contain explosive mixtures of gases, vapors, or liquids during normal working operations. (This is the most common C1, Div 1)
  2. An area where ignitable concentrations frequently exist because of repair or maintenance operations.
  3. The release of ignitable concentrations of gases or vapors due to equipment breakdown, while at the same time causing electrical equipment failure.

 

At LED Pros Worldwide we aim to make conditions safer for all involved. We have many industrial lighting fixtures that you can select from that meet or exceed the standards that exist today so that you can outfit your facility with whatever you may need. Look at the selection we have available on our website so you can see what fits your business the best. We provide thorough descriptions and product specifications for you so you can understand what each fixture offers. If you have any questions or would like a price quote or want to place an order with us, please call us toll-free at (844) 533-7767 and speak with one of our representatives. We will be glad to assist you and offer you any recommendations you may need so you get the safest lighting.

 

Buy Direct and Save $$$ – All of our lighting fixtures ship factory direct to your facility. Call sales toll-free (1-844-533-7767) 

 

Contact

  • LED Pros Worldwide does not share your information.