Product Overview

Atlas Precast Pole Bases represent a revolutionary advancement in lighting infrastructure installation, delivering superior quality and efficiency compared to traditional poured-in-place concrete foundations. Manufactured under strictly controlled climate-controlled conditions, these engineered concrete bases provide commercial contractors, electrical distributors, and facility managers with a turnkey foundation solution that dramatically reduces project timelines while ensuring consistent, professional results.

Each precast pole base arrives at your jobsite fully cured, reinforced, and conduit-ready, eliminating the variables and delays associated with on-site concrete work. With installation times reduced from days to approximately 45 minutes per base, Atlas Precast Pole Bases enable faster project completion, reduced labor costs, and improved scheduling flexibility. The precision manufacturing process ensures every base meets exacting specifications for dimensions, concrete strength, and structural integrity, providing the reliable foundation your lighting systems demand.

Key Features

Rapid Installation

• Installation time of approximately 45 minutes per base versus 3+ days for traditional poured concrete methods
• Eliminates concrete curing wait times and weather-related delays
• Conduit-ready design with pre-installed pathways for immediate wiring access
• Simple 4-step installation process: attach lifting bracket, lift to vertical, place in hole, and fill/tamp

Superior Concrete Strength

• 5,000 PSI concrete strength – significantly exceeding the 3,500 PSI typical of field-poured bases
• Enhanced structural integrity provides superior wind load resistance and long-term durability
• Consistent concrete quality achieved through controlled mixing and curing processes

Climate-Controlled Manufacturing

• All bases manufactured in temperature and humidity-controlled facilities
• Guaranteed uniform quality and finish on every base
• Eliminates weather-dependent construction variables and seasonal restrictions

Professional Appearance

• Clean, professional precast finish superior to field-formed sonotube installations
• Optional beauty rings available for enhanced aesthetic integration
• Consistent diameter and reveal above grade across all installations

Single-Source Procurement

• Complete foundation solution from one trusted vendor – Atlas Lighting Products
• Eliminates coordination with multiple suppliers for concrete, rebar, anchor bolts, and forming tubes
• Simplified project management, reduced administrative overhead, and streamlined logistics

Installation Flexibility

• Install on your schedule without dependence on concrete supplier availability
• Weather-independent installation process for year-round project execution
• Reduced site disruption and improved workflow coordination

Certifications and Compliance

Atlas Precast Pole Bases are engineered and manufactured to meet or exceed industry standards for concrete foundations supporting outdoor lighting structures. Each base is designed for compliance with local building codes and structural requirements. Atlas Lighting Products maintains rigorous quality control procedures throughout the manufacturing process to ensure consistent product performance and reliability. Specific certification documentation and engineering specifications are available upon request to support permitting and inspection requirements.

 

Technical Specifications

Specification	Details
Base Height Range	Up to 12 feet (customizable to project requirements)
Base Diameter Options	18 inches, 24 inches, 30 inches
Concrete Strength	5,000 PSI (exceeds typical field-poured 3,500 PSI)
Vertical Rebar Sizes	#4, #5, #6, #7, #8 (customizable quantity and spacing)
Rebar Hoop Sizes	#3, #4 (customizable spacing)
Ground Wire Options	#2/0, #2, #4, #6, #8, or None
Conduit Configurations	Up to two conduit runs, 1-4 conduits per run, customizable sizes and depths
Anchor Bolt Sizes	3/4 inch, 1 inch, 1.25 inch, or TBD (customizable length, projection, and bolt circle)
Reveal Above Grade	Customizable to project specifications
Installation Time	Approximately 45 minutes per base
Finish Options	Standard precast finish or with optional beauty ring

 

Applications

Atlas Precast Pole Bases are engineered for demanding commercial and industrial lighting applications where reliable foundation performance, rapid installation, and professional appearance are essential. These versatile concrete bases accommodate a wide range of pole-mounted lighting systems across diverse environments.

Commercial Parking Facilities

• Shopping centers, retail complexes, and big-box store parking areas
• Office parks and corporate campus parking structures
• Multi-family residential parking lots and garage entrances

Transportation Infrastructure

• Municipal streets, highways, and roadway lighting systems
• Airports, transit centers, and intermodal facilities
• Pedestrian walkways, bike paths, and greenway lighting

Recreational and Sports Facilities

• Athletic fields, tennis courts, and outdoor sports complexes
• Parks, playgrounds, and public gathering spaces
• Golf courses and country club facilities

Industrial and Manufacturing Sites

• Warehouse and distribution center perimeter lighting
• Manufacturing facilities and industrial parks
• Logistics yards, container terminals, and freight facilities

Institutional and Educational Campuses

• Universities, colleges, and K-12 school campuses
• Healthcare facilities and hospital complexes
• Government facilities and municipal properties

Specialty Applications

• Architectural and decorative lighting installations
• Security and surveillance lighting systems
• Banner poles, flag poles, and wayfinding signage support

Customization Options

Atlas understands that standardized solutions rarely meet the diverse requirements of modern lighting projects. Our precast pole bases are fully customizable to match your exact specifications, ensuring seamless integration with your pole systems, electrical design, and site conditions. Every base is manufactured to order based on your project requirements.

Dimensional Customization

• Total base height up to 12 feet to accommodate varying burial depths and wind load requirements
• Base diameter selection of 18 inches, 24 inches, or 30 inches matched to pole specifications
• Customizable reveal above grade for proper pole mounting and aesthetic integration

Structural Reinforcement

• Vertical rebar available in sizes #4, #5, #6, #7, or #8 with adjustable quantity and spacing
• Rebar hoop reinforcement in #3 or #4 sizes with customizable inches-on-center spacing
• Engineered to meet specific wind load ratings and structural load requirements

Grounding and Electrical

• Ground wire options: #2/0, #2, #4, #6, #8, or no ground wire as required
• Integrated grounding pathways ensure proper electrical safety and code compliance

Conduit Configuration

• Up to two independent conduit runs, each accommodating 1 to 4 conduits
• Customizable conduit sizes to match your electrical requirements and future expansion needs
• Adjustable depth positioning for each conduit run to coordinate with underground utilities

Anchor Bolt Specifications

• Anchor bolt diameter options: 3/4 inch, 1 inch, 1.25 inch, or to-be-determined based on pole manufacturer specifications
• Customizable bolt projection (thread length above base) to match pole base plate requirements
• Adjustable anchor bolt length for proper embedment depth and pull-out resistance
• Precise bolt circle diameter and pattern to match your pole mounting configuration

Aesthetic Options

• Standard clean precast concrete finish for professional appearance
• Optional beauty rings available for enhanced visual integration with surrounding landscape

Warranty

Atlas Lighting Products stands behind the quality and performance of our Precast Pole Bases with comprehensive warranty coverage. Each base is manufactured to precise engineering specifications using high-strength concrete and quality materials to ensure long-term structural integrity and reliable performance. Warranty terms and conditions are provided with each order and cover manufacturing defects in materials and workmanship. Our warranty demonstrates Atlas’s commitment to delivering superior products that meet the demanding requirements of commercial lighting infrastructure.

For complete warranty details, terms, conditions, and limitations, please contact your Atlas Lighting Products representative or visit our website. Warranty coverage is contingent upon proper installation following Atlas guidelines and normal use conditions. Extended warranty options may be available for qualifying projects.

Ordering Information

Ordering Atlas Precast Pole Bases is straightforward and efficient. Each base is custom-manufactured to your exact specifications, ensuring perfect compatibility with your lighting poles, electrical requirements, and site conditions. Our experienced technical sales team works directly with contractors, electrical distributors, engineers, and facility managers to ensure accurate specifications and smooth project execution.

How to Order

• Complete the Atlas Light Pole Base Requirements for Quote form with your project specifications
• Submit the form to your Atlas Lighting Products sales representative
• Our technical team will review your specifications and provide a detailed quotation with lead time
• Upon order approval, manufacturing begins with delivery scheduled to align with your project timeline

Required Specification Information

• Company name, project contact, job name, and shipping address
• Total base height and diameter (18 inch, 24 inch, or 30 inch)
• Pole base quantity and reveal above grade
• Vertical rebar size, quantity, and hoop specifications
• Ground wire size (if required)
• Conduit quantities, sizes, and depth positioning for each conduit run
• Anchor bolt size, length, projection, and bolt circle specifications
• Any special requirements or project-specific notes

Lead Times and Delivery

Standard lead times for Atlas Precast Pole Bases vary based on order quantity and current production schedules. Our manufacturing facilities maintain efficient production cycles to meet project deadlines. Rush orders and expedited production may be available for time-sensitive projects. Bases are shipped via freight carrier with careful packaging to prevent damage during transit. Delivery is coordinated with your project schedule to minimize on-site storage requirements.

Technical Support

Atlas Lighting Products provides comprehensive technical support throughout the specification, ordering, and installation process. Our engineering team is available to assist with load calculations, foundation sizing, customization questions, and installation guidance. We work directly with project engineers, contractors, and installers to ensure successful outcomes on every project.

_______________________________________________

Atlas Precast Pole Bases – Superior Quality, Faster Installation, Customized to Your Specifications

✓ Product Overview – Detailed introduction highlighting the revolutionary advantages over traditional poured concrete foundations

✓ Key Features – Six major categories covering rapid installation (45 minutes vs 3+ days), superior 5,000 PSI concrete strength, climate-controlled manufacturing, professional appearance, single-source procurement, and installation flexibility

✓ Certifications and Compliance – Industry standards coverage with note about documentation availability

✓ Technical Specifications – Comprehensive table detailing all customizable options including heights, diameters, rebar configurations, conduit options, anchor bolts, and more

✓ Applications – Six application categories covering commercial parking, transportation infrastructure, recreational facilities, industrial sites, institutional campuses, and specialty applications

✓ Customization Options – Detailed breakdown of dimensional, structural, electrical, conduit, anchor bolt, and aesthetic customization capabilities

✓ Warranty – Professional warranty section emphasizing quality commitment

✓ Ordering Information – Complete guide covering how to order, required specifications, lead times, technical support, and contact information